Ok i don't want to pay HOnda 115 to run a test. So i went to Autozone and did a check there.
Quick back story, last time my CEL came on it made it so i couldn't use my cruise control. Had it repaired and they told me it was the MAF sensor. I do have a cold air intake.
What sensor could this be? Honda said I don't have a MAF but a MAP (? WTF ?)
Code number one is: P0105 OEM Brand: HONDA Def. BBA/F sesor 21 heater system malfunction Probable cause BB1.-Open or short circuit condition BB2.-Poor electrical connection BB3.-Faulty A/F sensor
2nd code: P0103 Def. BBIAT sensor circuit high voltage Probable cause BB1.-Open or short circuit condition BB2.-Poor electrical connection BB3.-Faulty IAT sensor
3rd Code: P0108 Def. BBMAP sensor circuit high voltage Probable cause BB1.-Open or short circuit condition BB2.-Poor electrical connection BB3.-Faulty MAP sensor
So is this the lower "MAF" sensor located on the pipe on the CAI?
Anyhelp would be great. My inspection is due and i know i have to fix this prob before i get it inspected.
Registered: 05/05/06
Posts: 240
Loc: Orange County, NY
where in NY are you. i have a program that will show me the voltage and other readings of the sensors. if you not far from westchester county, rockland or orange county, give me a hollar
sounds like your maf is broken(that plastic piece that plugs into the intake tube), but strange that the map is throwing codes because its on the manifold not the intake.
_________________________
2007 Civic Si Sedan: 10psi Supercharged