Page 1 of 1 1
Topic Options
#55350 - 09/13/04 02:05 AM ? about stock IM
CivicVTi Offline
Sr Member


Registered: 12/02/99
Posts: 1176
Loc: Athens , Greece
What is the diameter of the stock IM opening (b16a)? I found a good deal on an ITR TB (which is 62mm I think) and I wonder if I have to port the IM opening (which should be at least 60mm, like the stock TB I believe).
_________________________
Honda Civic VTi '95 EG6 hatch (stock B16A2) B18C6 specR swap (Euro)

Top
Videos
#55351 - 09/13/04 07:06 AM Re: ? about stock IM
kysi Offline
Jr Member


Registered: 12/20/02
Posts: 494
Loc: kentucky
Honda/Acura Throttle Body Inside Diameters (in mm)

b18c1 60
b18c spec R 62
b18a 58
b18b 60
b16a SiR 58
b16a Sir2 / b16a2 60
b16a3 58
b20b/z 60
f20c 62
d15b7 56
d16a6 55
d16y7 56
d16y8 56
d16z6 56
ZC 55
d16a1 55
d16a8 55
h22a / h23a 60
f22 / f23 60

Hope that helps.

Larry


Edited by kysi (09/13/04 07:40 AM)
_________________________
People fail when there is a wishbone where their backbone should be.

Top
#55352 - 09/13/04 11:42 AM Re: ? about stock IM
CivicVTi Offline
Sr Member


Registered: 12/02/99
Posts: 1176
Loc: Athens , Greece
Thank you very much for the reply. What about intake manifold diameters. I suppose they are not exactly the same with the TB used. I would like to know the b16a2 and b18c5 (R) IM diameter (I think skunk2 opening is 65mm).
_________________________
Honda Civic VTi '95 EG6 hatch (stock B16A2) B18C6 specR swap (Euro)

Top
#55353 - 09/13/04 12:46 PM Re: ? about stock IM
kysi Offline
Jr Member


Registered: 12/20/02
Posts: 494
Loc: kentucky
This is what I came up with from some stats I had stored. Engine specifications between B16A and B16B. (ITR intake manifold is same as CTR)


Engine Type B16A------ B16B 98 Spec.R
Maximum Output 170ps/7800rpm-------185ps/8200rpm
Maximum Torque 16.0kg-m/7300rpm----------16.3kg-m/7500rpm
Bore x Stroke 81.0x77.4mm -------<- same
Displacement 1595cc--------- <- same
Compression 10.4 ---------------- 10.8
Maximum RPM 8000rpm------- 8400rpm
Valve Timing
at 1mm lift IN Open/Close BTDC15/ABDC45-------- BTDC18/ABDC45
EX Open/Close BBDC40/ATDC7 -------- BBDC45/ATDC10
Valve Lift IN 10.7mm, EX 9.4mm IN 11.5mm, EX 10.5mm
Inlet Valve Diamter 33mm x 2mm <- same
Spark Plug Type Heat Rate #6 Heat Rate------- #7 platinum
Throttle Bore Diameter 60mm ----------<- same
Intake Manifold Single pipe sideflow----------- <- same
Air Intake Diameter 65mm -------<- same
Exhaust Manifold 4-to-2 -------<- same
Exhaust Pipe Diameter 48.6-50.8mm 57.2mm
Silencer Flow Capacity 98liter/sec 115liter/sec
_________________________
People fail when there is a wishbone where their backbone should be.

Top
Page 1 of 1 1


Moderator:  Runnin@Redline Jr, Dr. BrokenLimits, Professor Paki 
Hop to:
Shout Box

CSi Sponsors

DiGBiC Lighters
DiGBiC Lighters
DallasColo
Dallas Colocation
ClubSi.com Shirts
ClubSi-Shirts
GameStop
Black-Friday Specials
Big Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Buy Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ
StopTech
StopTech Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
Brake Specials Near Me
Brake Specials Near Me
Brake Pad Coupons
Coupon Code "hondafetish"
Porsche Brakes
Porsche Brake Upgrades
2-Piece Rotors-Civic Type-R
2-Piece Civic Rotors
Advertisement

| Brake Pads | | How To Change Brake Pads | | Drilled Slotted Brake Kits Cheap | EBC Brake Kits | Performance Brake Kits | Brake Specials Near Me | How To Replace Brake Pads