Greddy turbo owners unite!

You are not logged in. [Log In] ClubSi » Forums » Performance Tuning Zone » Turbo or Supercharged Q&A » Greddy turbo owners unite!

Page 8 of 11

« First

Last »

Topic Options

#21380 - 12/10/03 01:49 AM Re: Greddy turbo owners unite!
DCSportsSI DCSportsSI Jr Member Registered: 01/26/03 Posts: 554 Loc: Jacksonville, FL	Nice car. I have some newb questions cause i know NOTHING about Turbo. Im getting the 18G kit in June, and need to know a few things. 1) Where does the FMU go in the car. I mean is it a computer or just a little box. Im guess its kinda like a piggy back system? 2) What exactly is the downpipe? and whats a test pipe? 3) Is there any performance difference with the Type 24 / 31 ic? Only running @5-6PSI, then maybe higher later? 4) Is the Blue Box set at one setting or can you adjust it at all?? With the Hondata FMU can i do the tuning myself? _________________________ Ricky @ Wiredspeed FlamencoT KTeller Camp1320 Earl
Top

Videos

#21381 - 12/10/03 02:28 AM Re: Greddy turbo owners unite!
DCSportsSI DCSportsSI Jr Member Registered: 01/26/03 Posts: 554 Loc: Jacksonville, FL	I hear people saying that they are running rich at low boost. And that the blue box makes you run rich. How can you adjust that not to run rich? tuning? and also, fuel injectors. Is it fine to just get bigger injectors to start with? Im thinking that the FMU is only going to use a certain amount of fuel anyways correct? im new at this. thanks. _________________________ Ricky @ Wiredspeed FlamencoT KTeller Camp1320 Earl
Top

#21382 - 12/10/03 02:42 AM Re: Greddy turbo owners unite!
DCSportsSI DCSportsSI Jr Member Registered: 01/26/03 Posts: 554 Loc: Jacksonville, FL	Does anyone have pics of the Type 31 FMIC? _________________________ Ricky @ Wiredspeed FlamencoT KTeller Camp1320 Earl
Top

#21383 - 12/15/03 04:54 AM Re: Greddy turbo owners unite!
JAMinCiViC JAMinCiViC Post Master Sr Registered: 02/25/00 Posts: 3918 Loc: San Diego, now Iwakuni, JAPAN	Check the sig. for pics. As for fuel, the blue box will do fine for the set boost, any higher and you can toast some pistons. Save up for a EMS, like hondata or AEM. This will definatley be the best way to go to cure fuel probs. Also, use the search button. It has helped me alot to figure out my setup _________________________ JORDAN - [EM1 Crew] 20% OFF @ KARMALOOP.COM -->USE REP CODE JL7116
Top

#21384 - 01/05/04 01:51 AM Re: Greddy turbo owners unite!
civicnation99 civicnation99 Newbie Registered: 02/14/03 Posts: 64 Loc: missouri	when u get your kit do not install it until you get proper fuel management the blue box no matter what any one says does not really cut it, invest in the hondata s200 system because as every one knows the si isnt really that fast on 6psi u WILL want to crank it up i would recamend bigger injectors im going with 550's soon because my duity cycle is maxing out at even 8psi, but make sure you get colder plugs (ngk brk7e) some msd wires, your blow off valve, definitely get a intercooler no matter what you do get a fuel pressure guage, better fuel rail, fuel pressure regulator and a diecent boost controller, even with hondata i still wouldnt recamend running more than 7psi on stock internals hell i fried the crap out of mine at 6 although the greddy kit is a fairly complete kit most definitely everything you need is NOT included but hats off to greddy for a badass spooling turbo i dont get any lag at all at 10psi hope this helped also if im wrong about anything please some one correct me, later mike ^_^
Top

#21385 - 01/19/04 08:46 PM Re: Greddy turbo owners unite!
bluby4si bluby4si Poster Registered: 09/29/03 Posts: 205 Loc: Pitt, PA	do you have to weld the bov flang on the IC piping on greedy IC kit??? _________________________ 99 civic si turbo
Top

#21386 - 01/29/04 03:09 PM Re: GOT MY GREDDY TURBO!...and other goodies
00Blue 00Blue Post Master Sr Registered: 06/28/02 Posts: 4030 Loc: simi valley CA	Quote: So I got my my turbo Saturday afternoon by fedex ground and I'm wondering how much whp I should be putting down with the following mods.... 2000 civic si Greddy turbo greddy type 31 IC Greddy turbo timer greddy profec-B II boost controller HKS SSBV NGK wires and 1 step colder plugs power core hi-flow cat 2.5 inlet 2.25 outlet skunk 2 catback exhaust Exedy organic racing clutch .....autometer gauges already have. How much should I be putting down at 6 psi? thanks can you tell me or give me a link as to where you got this cat??? thanks mike. _________________________ "it's a honda.. A/C is like a kill switch"
Top

#21387 - 03/04/04 05:27 PM Re: Greddy turbo owners unite!
samurai samurai Newbie Registered: 03/04/04 Posts: 9 Loc: Oslo , Norway	Hey... greetings from Norway..... Im new on this forum.. i own (for time beeing) two Civic Si Coupe`s.... The first one is a purple (camelia red P4) 1994 Civic Si Coupe from Canada: B16A2 Greddy/TRUST ITR Turbokit (TD 0518G / 8.5Psi) 2.25" downpipe 2.5" free-flow exhaust(just one muffler in the rear...Ractive 3"- 4 1/2") Forge Motorsport* Intercooler (*UK) (dim. 28"x6.8"x3.4") 2.5" ITR/Civic intercoolerpiping TRUST TYPE R Blow-off Wiseco Forged Pistons ( 9.8:1cr..) Crower Billet Crowerods RC 500cc injectors Apexi V-AFC hack ignition untouched... (use racegas when i race and 93(98)octane elsewhere...!) Custom made cold-air intake....(very nicely done infact..hehe!) 236whp/8010rpm - 188tq.... at 8.5-11psi (boost spike at 7000rpms... jumps from 8.5 to 11-11.5psi!) 7000rpms- about 180whp........8010rpms 236whp.... Whoooo-hooooooo!!! Damn that thing pulls hard at the top... hehehe.. Best quartermile: 13.167sec / 109.96mph... 15" w/ worn street tires 205/50 continental..... Car numb. two: 1999 Civic Coupe , Electron blue...... (its now painted in PPG Flamboyance wich is a deep candy cobalt base, with small fine blue/ purple metallic flakes..!) This car i bought from a guy in Hacienda Heights outside LA.... Its now in transit to Norway..... hope to pick her up somtime around 1-7 April..!! She is heavily modified... upgrades for over $35 000..... not incl. labour and time....!! (actually a car from 2F2F... the main car that races Brian in Arizona on his journey over to Miami.... PS! only see on DVD ,alternative Start ...." A Prelude to....".....!!!!!) she has now a Vortech kit on her.... but ill throw that away for a Fully buildt Golden Eagle / Full-Race Turbo engine... (with Hondata engine managment....!!) Will visit LA this summer , so i bring a B16 engine block with me... Will also travel to visit Geoff at Full-Race , and purchase on of their stg. 2 kits..!! okidoki... see ya... _________________________ "Bottles are for babyes....real men get Blown!!!" 1999 Si Coupe DOHC VTEC.. (heavily modified!!!) Full-Race stg.2 on the way.... 1994 Si Coupe B16A2 Turbo`d Hybrid
Top

#21388 - 03/14/04 03:23 PM Re: Greddy turbo owners unite!
Jsboosted99si Jsboosted99si Newbie Registered: 03/14/04 Posts: 64	Dont have mine yet but i will at the end of the month ill still post my setup. 99si Greddy turbo kit type 24 ic type xs-RFL bov ITR cams ITR ported manifold 2.5 inch pipeing downpipe back DC short shifter I plan on running 8 psi, and wanted to know if i could keep the blue box and be safe or will i have to get the hondata s200 with boost? Anyone with a similar setup? If so what did you dyno and what did you run in the 1/4? Edited by Jsboosted99si (03/14/04 04:37 PM)
Top

#21389 - 04/08/04 02:42 PM Re: Greddy turbo owners unite!
99blusi 99blusi Sr Member Registered: 03/20/02 Posts: 1018 Loc: Michigan	Here's my new list... 13.9@100mph 6.5 psi on the blue box This year... Greddy TDO5 18G turbo Tyrus 30x6x2 intercooler Custom intercooler piping Turbo XS blow off valve 450cc injectors GSR cams AEBS Typhoon intake manifold Hondata intake gasket NGK spark plugs AEM Fuel pressure regulator Custom 2.5”-3” stainless downpipe and cat delete Energy Suspension motor mount inserts HCP polyurethane drivers side mount OBD1 chipped P28 ecu Uberdata DC Sports short throw shifter Energy Suspension shifter bushings Exedy Racing organic clutch BFG G-force T/A Drag radials 205/50/15 Falken Azenis Sports 205/50/15 Blitz FATT turbo timer Autometer boost gauge Autometer modified A/F gauge Autometer shift light _________________________ 1999 Civic Si...One Fab/SC61...b16 hotness http://www.geocities.com/high_grad/99Blusi.html My vouch thread.... http://forums.clubsi.com/showflat.php?Ca...o=&fpart=1&vc=1
Top

#21390 - 04/23/04 12:06 PM Re: Greddy turbo owners unite!
Turbo__E Turbo__E Newbie Registered: 09/10/02 Posts: 25 Loc: Hongcouver BC	Quote: Does anyone have pics of the Type 31 FMIC? it doesnt come in black tho _________________________ If you're not breaking parts, you're not making enough power.
Top

#21391 - 05/10/04 09:57 AM Re: Greddy turbo owners unite!
Laxhero2 Laxhero2 Newbie Registered: 07/18/03 Posts: 12 Loc: MD, BAltimore	i have a ep3 si (2003) and i run a greddy turbo kit with greddy i/c and run it 6lbs at 236 whp with type s bov and other mods.
Top

#21392 - 05/10/04 10:39 PM Re: Greddy turbo owners unite!
Vazquez27 Vazquez27 Jr Poster Registered: 05/10/04 Posts: 143 Loc: Boston MA,	Hey i got a question im stuck i want to get a turbo charger for my car but at the same time i want a super charger or can i put both of them on the same engine ? or is it one or the other ? btw i have a 1999 Honda Si vtec thank you _________________________ Click to enlarge
Top

#21393 - 05/12/04 02:37 PM Re: Greddy turbo owners unite!
ShaneSestito ShaneSestito Jr Member Registered: 08/08/03 Posts: 403	Howdy guys... i am ready to purchase a Greddy kit, it seems the nicest alternative to a lot of money. Nothing like a lisenced dealer, eh? After about six months of research, i have come to terms with my fiscal limitations, and what is available. I plan on never touching anything inside the motor. I am going to pick up the Greddy system (intercooled is the aim, will the intake temps be too hot to drive it without the intercooler??) and slap it on. I would like to run the stock Greddy unit untill i can afford putting all the engine manegement and fuel breathing devices on the car and pay modacar or the latter to dyno tune it. But that is just me hoping for upwards of 200whp. Realisticly, i will be driving around with the stock Greddy kit, and i seem to be very happy about it As far as the breathing of the ass of the car, my aim is to purchase the rear section of an exhaust, then do the custom piping from the cat back, and i can make my own cat replacement. I'm planning on taking off the stock piping into the stock muffler, and welding on the straight 3" or 2.5" (whichever i end with, and i also heard once that the stock exhaust is 2.5, just poorly routed. That seems awful big for such a low displacement engine.) to the muffler itself, then adding a flange. Is the resonance chamber where the acceptor is large enough to support a 3" inlet? a 2.5" one? This will allow me a lot of flexibility for smogging the vehicle, as well as keeping the noise down. I like the idea of changing out my 'entire' exhaust, as opposed to a baffle. That and the stock exhaust would be less restrictive with 3" piping or the like. I think that sums up everything, there are a lot of indirect and implied questions, feel free to read the post a few times and let me know what up Thanks guys, and happy boostin, eh?
Top

#21394 - 05/12/04 02:46 PM Re: Greddy turbo owners unite!
MayhemSi MayhemSi Moderator Registered: 06/30/00 Posts: 3490 Loc: Austin, TX	I'm assuming from reading your post that you live in cali? (modacar is in cali, right?). Running a turbo without an IC is not really a good idea in the first place much less in a place that gets as hot as it does there. I understand going turbo can be expensive, but save your money up a little bit and do it right. Remember you will probably end up needing supporting mods on top of the kit such as a clutch, etc. Basically, save up for the IC and drive it nice until you can put some real management on it like hondata/uberdata/aem/etc. As far as an exhaust system goes, a true mandrel bent catback system is definitely a good investment. You can pick up 30+whp simply by putting on a good exhaust system instead of the stock crap. _________________________ 00 EBP Si w/boltons -- Sold! 03 Lancer Evolution VIII Distortion: if it's at her place, that's one thing Distortion: but if i drop bombs on her chest and she rolls that shit over on my bed.....there's gonna be a dead hooker on the 6 o'clock news
Top

#21395 - 05/13/04 01:34 AM Re: Greddy turbo owners unite!
ShaneSestito ShaneSestito Jr Member Registered: 08/08/03 Posts: 403	Yes indeed i do live in California. I suppose the IC deal was just me being cheap, i have no problem waiting for the extra five or seven hundred dollars. But as far as the exhaust goes, the idea is that i will have a full 3" mandral bent exhaust, with a nice large canister on the end, but it will be attached behind or in front of the axel (wichever i can mount it better on and still be able to remove it easily) so that i can switch between the stock muffler (with the 3" into the muffler, or if all else fails, 3"-stock collector) for a large difference in asthetics, which I think will be miniscule next to the sound deadning... thanks again, i like feedback
Top

#21396 - 05/13/04 03:44 AM Re: Greddy turbo owners unite!
gohangotensi gohangotensi Poster Registered: 01/28/04 Posts: 343 Loc: Irvine, CA	Question for SoCal people with Greddy kit + IC + BOV: I'm pretty sure the above would pass the sniffer, but has anyone passed the visual? Or are they asses about it? _________________________ 03 Dodge Neon SRT-4
Top

#21397 - 05/15/04 03:54 AM Re: Greddy turbo owners unite!
Kingcutz Kingcutz Major Member Registered: 08/02/00 Posts: 1262 Loc: Nor CAL	question for the greddy turbo people out there, i was wondering if the greddy turbo manifold can be mated with any other turbines. It looks like it can be mated with a t3/t4 turbo but just wanted to know if they line up? If they do please let me know, also anyone out there planning to upgrade their turbo? What would you go for? _________________________ EBP civic Si 00 AIM: amarinias You can find me in the N CALI board
Top

#21398 - 05/20/04 02:37 AM Re: Greddy turbo owners unite!
Anonymous Anonymous Unregistered	Quote: Question for SoCal people with Greddy kit + IC + BOV: I'm pretty sure the above would pass the sniffer, but has anyone passed the visual? Or are they asses about it? anybody gonn answer this?
Top

#21399 - 05/20/04 03:29 AM Re: Greddy turbo owners unite!
gohangotensi gohangotensi Poster Registered: 01/28/04 Posts: 343 Loc: Irvine, CA	I figured out my own question. You could just have an extra charge pipe without BOV and swap that in easily. The same would go for the IC. Just take that out and run the stock pipe from turbo to charge pipe. This sound good? _________________________ 03 Dodge Neon SRT-4
Top

#21400 - 06/04/04 08:50 PM Re: Greddy turbo owners unite!
FBP Si 2000 FBP Si 2000 Post Master Jr Registered: 05/09/00 Posts: 1624 Loc: ?	Quote: Question for SoCal people with Greddy kit + IC + BOV: I'm pretty sure the above would pass the sniffer, but has anyone passed the visual? Or are they asses about it? I'd hope that would pass the sniffer...visual...possibly...mines passed visual but failed sniffer and that's because of other stuff... _________________________ '00 FBP Si - R.I.P. 7/24/06
Top

#21401 - 06/28/04 08:01 PM Re: Greddy turbo owners unite!
pearltypesh pearltypesh Jr Poster Registered: 08/01/02 Posts: 111 Loc: so cali	245 bhp @ .5 bar. 13.2 98 mph with out nx. fully greddy kit. with type s bov and type 24. _________________________ convicted b16 rapist. boosted type sh with a pinch of nitrous
Top

#21402 - 07/24/04 06:34 PM Re: Greddy turbo owners unite!
Bern4 Bern4 Newbie Registered: 12/04/00 Posts: 38 Loc: Ambler PA	Greddy People, just have a quick question. I'm going to be running a greddy turbo on a b16 in an EG hatch. I was thinking of getting the SP2 exhaust. If I'm running at stock boost levels, is a 2.25" piping for an exhaust too restrictive for a greddy turbo setup? Thanks for your help.
Top

#21403 - 07/25/04 02:17 AM Re: Greddy turbo owners unite!
HndaSIguy HndaSIguy Major Member Registered: 07/06/03 Posts: 1451 Loc: Fort Bragg, NC	To answer the question about welding the BOV to the intercooler piping asked a little ways up, yes you do. _________________________ Zac http://www.newconsoles.com All the latest info from PS3, 360 and Wii. 06 HRP SI # 1827 Purchased 4 Feb 06 HFP Aero Kit and 18's Eibach Sportlines DC Sports Header and Exhuast AIM-HndaSIguy
Top

#21404 - 07/27/04 02:02 AM Re: Greddy turbo owners unite!
Knox_PWNS_SI Knox_PWNS_SI Newbie Registered: 07/27/04 Posts: 14	come join http://knoxforum.myunite.net/unm because its better than clubsi
Top

#21405 - 07/29/04 05:32 PM Re: Greddy turbo owners unite!
SiRacer SiRacer Post Master Supreme Registered: 10/25/99 Posts: 22862 Loc: Phoenix, AZ	Quote: come join http://knoxforum.myunite.net/unm because its better than clubsi Your gay because I said so.
Top

#21406 - 08/06/04 11:26 AM Re: Greddy turbo owners unite!
SiViC2K SiViC2K Post Master Jr Registered: 07/06/01 Posts: 1702 Loc: Wadevilletown, Fl	Whats up guys. I was just wonderin why I dont hear anything about the E-manage from anyone. Is it not a good FMU? because it does come with the kit for a while now and I guess i was just waitin for someone to give some feedback about it. Im contemplating whether to go with the Greddy 18G or the Stage 1 kit from my local South Fla Performance. Cant go wrong with them from reputation alone. Give me some suggestions guys. _________________________ -A bad day fishing is still better than a good day working!
Top

#21407 - 08/13/04 05:56 PM Re: Greddy turbo owners unite!
Turbo__E Turbo__E Newbie Registered: 09/10/02 Posts: 25 Loc: Hongcouver BC	update: ran 13.36 @104 MPH full interior. 224WHP 218TQ 7 PSI update Avatar too. please dont steal. back off, get your own sandwich. _________________________ If you're not breaking parts, you're not making enough power.
Top

#21408 - 08/21/04 11:00 AM Re: Greddy turbo owners unite!
Anonymous Anonymous Unregistered	quick question for you GReddy guys....how much boost can you run befoer you recommend sleeving your block? because the shop i use say they would have to pull my block and ship it to get sleeved, but they can do rids and pistons there...so what do you guys think? would forged 9.5:1 or 9:1 pistons with forged rods be enough to run stock to 10 psi safely???
Top

#21409 - 09/01/04 05:01 PM Re: Greddy turbo owners unite!
shupadupa shupadupa Post Master Sr Registered: 09/08/00 Posts: 4217 Loc: Painesville, OH	Just wanted to say good bye GReddy guys, i put the turbo kit on 03/02 and sold the car 08/04. It was hella fun, but it was time to move on to bigger and better. _________________________ '03 AS Evolution VIII GSR '05 BMW X3 (6-spd manual)
Top

#21410 - 09/01/04 09:25 PM Re: Greddy turbo owners unite!
99blusi 99blusi Sr Member Registered: 03/20/02 Posts: 1018 Loc: Michigan	Just pulled off a 13.3 on my Greddy kit...although about the only things left from the kit are turbo/mani and charge pipe. Everything else has been upgraded... _________________________ 1999 Civic Si...One Fab/SC61...b16 hotness http://www.geocities.com/high_grad/99Blusi.html My vouch thread.... http://forums.clubsi.com/showflat.php?Ca...o=&fpart=1&vc=1
Top

#21411 - 09/02/04 10:29 AM Re: Greddy turbo owners unite!
Stryker124 Stryker124 Major Member Registered: 10/22/00 Posts: 1281 Loc: Mentor, Ohio USA	Quote: Just wanted to say good bye GReddy guys, i put the turbo kit on 03/02 and sold the car 08/04. It was hella fun, but it was time to move on to bigger and better. Fortunately I picked up his Si, so its still in the Family. _________________________ 2010 Mazdaspeed3 "Please, please let the warranty expire soon...I needs a downpipe and some ECU work..."
Top

#21412 - 09/14/04 11:01 PM Re: Greddy turbo owners unite!
IntenseCivic IntenseCivic Post Master Jr Registered: 10/31/02 Posts: 1821 Loc: Southern Cali (OC)	i just got a used greddy turbo kit (it should be on its way to my house right now). Complete Greddy turbo kit Type-31 FMIC HKS BOV i was wondering if it was safe to just throw the kit on the way it is, or do i need to get it tuned first? _________________________ Now - '99 EBP Si Past - R.I.P my '99 EBP Si 02/06/04 Click here for my FS & WTB post on 99-00 Si Parts!
Top

#21413 - 09/16/04 12:43 PM Re: Greddy turbo owners unite!
Ben_si Ben_si Newbie Registered: 07/08/04 Posts: 17 Loc: Ma	I want to do a turbo kit come spring and i havnt hurd of anything bad with the GReddy should i go with it? what will I need just the kit or something else...O BTW this car is a daily driver and has to get me 2 work everyday _________________________ V-tec kicks ass need i say more?
Top

#21414 - 09/24/04 08:45 PM Re: Greddy turbo owners unite!
99sprayingSI 99sprayingSI Post Master Registered: 06/26/02 Posts: 2458 Loc: Miami FL	03 RSX-s Greddy turbo @12 psi 303 whp 270tq on a dyno jet 8.5@89mph in the 8th on street tires(spining like a mother) 1/4 times soon to come Hondata for management and 550cc injectors Everything else is stock _________________________ 03 4Runner (got over cars and this thing is an ox- tow machine KTM 690 enduro R (adventure ridding) Yamaha R6 (Track only) Kawasaki 300 (Track only- I love this bike) Ducati Hypermotard Evo SP (beast)
Top

Page 8 of 11

« First

Last »

Previous Topic View All Topics

Index Next Topic

Moderator: M3Pilot or M3Driver, SiAdam, Professor Paki

Hop to:

Shout Box

CSi Sponsors

DiGBiC Lighters
DiGBiC Lighters
DallasColo
Dallas Colocation
ClubSi.com Shirts
ClubSi-Shirts
GameStop
Black-Friday Specials
Big Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Buy Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ
StopTech
StopTech Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
Brake Specials Near Me
Brake Specials Near Me
Brake Pad Coupons
Coupon Code "hondafetish"
Porsche Brakes
Porsche Brake Upgrades
2-Piece Rotors-Civic Type-R
2-Piece Civic Rotors